Sealing travertine pavers is a personal choice and may be preferred in certain settings, such as patios or pool decks that are frequently used for entertaining. While sealing is not required, it may help enhance the natural color variations of the stone and may also offer a degree of protection against spills or surface staining.

Some homeowners and installers also opt for sealers with non-slip additives (such as “shark skin” formulas) for increased traction—especially on chiseled-edge pavers used in driveways or high-traffic areas.

Potential Benefits of Sealing

• May help reduce the absorption of liquids such as wine, oil, or soda, which can otherwise stain unsealed natural stone.

• May offer some resistance to mildew or surface buildup, particularly in damp or shaded areas.

• Can enhance the appearance of the stone by deepening color contrast and adding a light sheen, depending on the type of sealer used.

Potential Considerations

• Sealer may need to be reapplied periodically depending on the product used, environmental exposure, and foot traffic. Some sealers last several years, while others may require more frequent reapplication.

• Maintenance and resealing should be factored into long-term care planning.

• It’s important to follow manufacturer guidelines closely to avoid buildup or uneven application.

How to Seal Travertine Pavers

What You May Need:

• Travertine-safe cleaner

• Travertine-compatible sealer

• Spray bottle with clean water

• Roller brush

• Absorbent, clean white cloth

Step 1 – Clean the Surface
Use a cleaner that is compatible with the sealer you’ve chosen. Follow the cleaning product’s instructions, rinse thoroughly, and allow the surface to dry completely. Once dry, sweep away any debris or remaining residue.

Step 2 – Apply the Sealer
Lightly mist the surface with water to slightly dampen the stone—this can help the sealer absorb more evenly. Using a roller brush, apply a thin and even coat of the sealer according to the product instructions. After about 30 minutes, gently wipe away any excess using a clean white cloth to avoid staining the stone.

Step 3 – Optional Second Coat
If the sealer manufacturer recommends a second coat, it can typically be applied shortly after the first. Allow the area to cure undisturbed for 24 hours before allowing foot traffic or exposure to moisture.

Disclaimer:
Sealing and maintenance results can vary based on product type, environmental conditions, usage, and installation quality. Always consult with a licensed and insured professional familiar with Travertine before sealing or maintaining your pavers. They can recommend products and techniques appropriate for your specific project. Travertine Mart does not guarantee results and is not responsible for how products are used or whether they are suitable for your intended application.